List of ASTM Standard 11301 to 11400

ASTM    D 6443-04(2010) : Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM    D 6446-01(2006) : Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM    D 6447-09 : Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
ASTM    D 6448-09 : Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
ASTM    D 6449-99(2008) : Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
ASTM    D 6450-12E1 : Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
ASTM    D 6451/D 6451M-99(2014)E1 : Standard Guide for Application of Asphalt Based Protection Board
ASTM    D 6452-99(2012)E1 : Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
ASTM    D 6454-99(2011) : Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
ASTM    D 6455-11 : Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
ASTM    D 6456-10 : Standard Specification for Finished Parts Made from Polyimide Resin
ASTM    D 6457-08(2013) : Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
ASTM    D 6458-12 : Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular
ASTM    D 6459-11 : Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM    D 6460-12 : Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM    D 6461-99(2007)e2 : Standard Specification for Silt Fence Materials
ASTM    D 6462-03(2008) : Standard Practice for Silt Fence Installation
ASTM    D 6463/D 6463M-06(2012) : Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear  Loading
ASTM    D 6464-03a(2009)e1 : Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM    D 6465-99(2012) : Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
ASTM    D 6466-10 : Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM    D 6467-13 : Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM    D 6468-08(2013) : Standard Test Method for High Temperature Stability of Middle Distillate Fuels
ASTM    D 6469-12 : Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM    D 6470-99(2010) : Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM    D 6471-10 : Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
ASTM    D 6472-10 : Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
ASTM    D 6473-10 : Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control
ASTM    D 6474-12 : Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM    D 6475-06 : Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM    D 6476-12 : Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
ASTM    D 6477-13 : Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM    D 6478-10 : Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM    D 6479-12 : Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM    D 6480-05(2010) : Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
ASTM    D 6481-99(2010) : Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM    D 6482-06(2011) : Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM    D 6484/D 6484M-14 : Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM    D 6485-11 : Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
ASTM    D 6486-01(2011) : Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
ASTM    D 6487-10 : Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
ASTM    D 6488-08(2013) : Standard Terminology Relating to Print Problems
ASTM    D 6489-99(2012) : Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
ASTM    D 6490-99(2006) : Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
ASTM    D 6491-09 : Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM    D 6492-99(2011) : Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated  Steel
ASTM    D 6493-11 : Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM    D 6494-99(2010) : Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM    D 6495-09 : Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
ASTM    D 6496-04a(2009) : Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
ASTM    D 6497-02(2010) : Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
ASTM    D 6498-99(2007) : Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
ASTM    D 6499-12 : Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
ASTM    D 6500-00(2012)e1 : Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM    D 6501-09 : Standard Test Method for Phosphonate in Brines
ASTM    D 6502-10 : Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM    D 6503-99(2009) : Standard Test Method for Enterococci in Water Using Enterolert
ASTM    D 6504-11 : Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
ASTM    D 6505-00 (Reapproved 2012) : Standard Test Method for Assay of normal-Propyl Bromide Content
ASTM    D 6506-01(2009) : Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing
ASTM    D 6507-11 : Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
ASTM    D 6508-10 : Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM    D 6509/D 6509M-09 : Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
ASTM    D 6510-00(2006) : Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems
ASTM    D 6511/D 6511M-06(2011)e1 : Standard Test Methods for Solvent Bearing Bituminous Compounds
ASTM    D 6512-07(2014) : Standard Practice for Interlaboratory Quantitation Estimate
ASTM    D 6513-08 : Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
ASTM    D 6514-03(2008) : Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
ASTM    D 6515-00(2010) : Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM    D 6517-00(2012)E1 : Standard Guide for Field Preservation of Groundwater Samples
ASTM    D 6519-08 : Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM    D 6520-06(2012) : Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
ASTM    D 6521-13 : Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
ASTM    D 6522-11 : Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM    D 6523-00(2014)E1 : Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
ASTM    D 6524-00(2011) : Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM    D 6525-12 : Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM    D 6526-12 : Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
ASTM    D 6527-00(2008) : Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
ASTM    D 6528-07 : Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
ASTM    D 6529-11 : Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50<span class=’unicode’>&#x2013;</span>1000 <span class=’unicode’>&#x03BC;</span>S/cm
ASTM    D 6530-00(2013) : Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
ASTM    D 6531-00(2010) : Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM    D 6532-00(2006) : Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
ASTM    D 6534-05(2010) : Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
ASTM    D 6535/D 6535M-05(2010)e1 : Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
ASTM    D 6536/D 6536M-00(2010)e1 : Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
ASTM    D 6537-00(2014) : Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM    D 6538-12 : Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM    D 6539-13 : Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
ASTM    D 6540-12 : Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
ASTM    D 6541-11 : Standard Specification for HFC-236fa, 1,1,1,3,3,3<span class=’unicode’>&#x2013;</span>Hexafluoropropane, (CF<sub>3</sub>CH<sub> 2</sub>CF<sub>3</sub>)
ASTM    D 6542-05(2010) : Standard Practice for Tonnage Calculation of Coal in a Stockpile
ASTM    D 6543-14A : Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
ASTM    D 6544-12 : Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
ASTM    D 6545-10 : Standard Test Method for Flammability of Textiles Used in Children’s Sleepwear
ASTM    D 6546-00(2010) : Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
ASTM    D 6547-00(2010) : Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
ASTM    D 6549-06(2011) : Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM    D 6550-10 : Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST