List of ASTM Standard 11401 to 11500

ASTM    D 6551/D 6551M-05(2011) : Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
ASTM    D 6552-06(2011) : Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
ASTM    D 6553-00(2010) : Standard Test Method for Coolant Compatibility of Way Lubricants
ASTM    D 6554/D 6554M-14 : Standard Specification for 100 % Cotton Denim Fabrics
ASTM    D 6555-03(2008) : Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
ASTM    D 6556-14 : Standard Test Method for Carbon Black – Total and External Surface Area by Nitrogen Adsorption
ASTM    D 6557-13 : Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
ASTM    D 6558-00a(2005) : Standard Test Method for Determination of TGA CO<inf>2</inf> Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM    D 6559-00a(2010) : Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM    D 6560-12 : Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
ASTM    D 6561-06(2011) : Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2<span class=’unicode’>&#x2013;</span>phenyl-1) Piperazine (MOPIP) in the Workplace
ASTM    D 6562-12 : Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
ASTM    D 6563-12 : Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
ASTM    D 6564-00(2012)E1 : Standard Guide for Field Filtration of Groundwater Samples
ASTM    D 6566-14 : Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM    D 6567-14 : Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
ASTM    D 6568-00(2011) : Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
ASTM    D 6569-14 : Standard Test Method for On-Line Measurement of Ph
ASTM    D 6570-04(2010) : Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
ASTM    D 6572-13E1 : Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
ASTM    D 6573/D 6573M-13 : Standard Specification for General Purpose Wirebound Shipping Boxes
ASTM    D 6574/D 6574M-13E1 : Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
ASTM    D 6575-14 : Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM    D 6576-13 : Standard Specification for Flexible Cellular Rubber Chemically Blown
ASTM    D 6577-06(2011)e1 : Standard Guide for Testing Industrial Protective Coatings
ASTM    D 6578/D 6578M-13 : Standard Practice for Determination of Graffiti Resistance
ASTM    D 6579-11 : Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin  and Terpene Resins by Size-Exclusion Chromatography
ASTM    D 6580-00(2009) : Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM    D 6581-12 : Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
ASTM    D 6583-13 : Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
ASTM    D 6584-13E1 : Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
ASTM    D 6585-11 : Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM    D 6586-03(2008) : Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
ASTM    D 6587-12E1 : Standard Test Method for Yarn Number Using Automatic Tester
ASTM    D 6588/D 6588M-11 : Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
ASTM    D 6589-05(2010)e1 : Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
ASTM    D 6590/D 6590M-00(2012) : Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
ASTM    D 6591-11 : Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates&mdash;High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM    D 6593-13B : Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
ASTM    D 6594-13 : Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C
ASTM    D 6595-00(2011) : Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM    D 6596-00(2011) : Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
ASTM    D 6597-10 : Standard Practice for Assessment of Attaining Clean Up Level for Site Closure
ASTM    D 6598-11 : Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
ASTM    D 6599-00(2008) : Standard Practice for Construction of Live Fascines on Slopes
ASTM    D 6600-00(2013) : Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
ASTM    D 6601-12 : Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM    D 6602-13 : Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM    D 6603-12 : Standard Specification for Labeling of UV-Protective Textiles
ASTM    D 6604-00(2013) : Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
ASTM    D 6605-06(2011) : Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
ASTM    D 6606-00(2010) : Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
ASTM    D 6607-00(2009) : Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
ASTM    D 6608-12 : Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
ASTM    D 6609-08 : Standard Guide for Part-Stream Sampling of Coal
ASTM    D 6611-00(2007) : Standard Test Method for  Wet and Dry Yarn-on-Yarn Abrasion Resistance
ASTM    D 6613-08(2013) : Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric
ASTM    D 6612-00(2011) : Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
ASTM    D 6614-07(2011) : Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
ASTM    D 6615-14a : Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM    D 6616-07(2012) : Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C
ASTM    D 6617-13 : Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM    D 6618-14 : Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
ASTM    D 6619-00(2012) : Standard Practice for  Incorporating Pigments by High Speed Dispersion
ASTM    D 6620-06(2010) : Standard Practice for Asbestos Detection Limit Based on Counts
ASTM    D 6621-00(2012) : Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM    D 6622-01(2009) : Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
ASTM    D 6624-12 : Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM    D 6625-13 : Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
ASTM    D 6626-09 : Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
ASTM    D 6627/D 6627M-11 : Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM    D 6628-03(2010)e1 : Standard Specification for Color of Pavement Marking Materials
ASTM    D 6629-01(2012)E1 : Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
ASTM    D 6630-08 : Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
ASTM    D 6631-05(2011) : Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM    D 6633-05(2010) : Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
ASTM    D 6634/D 6634M-14 : Standard Guide for Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
ASTM    D 6635-01(2007) : Standard Test Method for Performing the Flat Plate Dilatometer
ASTM    D 6636-01(2011) : Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM    D 6637-11 : Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM    D 6638-11 : Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
ASTM    D 6639-01(2008) : Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
ASTM    D 6640-01(2010) : Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM    D 6641/D 6641M-09 : Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM    D 6642-01(2006) : Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
ASTM    D 6643-01(2011) : Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
ASTM    D 6644-01(2013) : Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM    D 6645-01(2010) : Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM    D 6646-03(2008) : Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
ASTM    D 6647-01(2011) : Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM    D 6648-08 : Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM    D 6653/D 6653M-13 : Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM    D 6654-05(2010) : Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
ASTM    D 6655-01(2007) : Standard Terminology Relating to Mechanical Pump Dispensers
ASTM    D 6656-14a : Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
ASTM    D 6657-14a : Standard Test Method for Ph of Wet Blue
ASTM    D 6658-08(2013) : Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
ASTM    D 6659-10 : Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests
ASTM    D 6660-01(2014)e1 : Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM    D 6661-10 : Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST