List of ASTM Standard 11601 to 11700

ASTM    D 6772-02(2007) : Standard Test Method for Dimensional Stability of Sandwich Core Materials
ASTM    D 6773-08 : Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
ASTM    D 6774-02(2010) : Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM    D 6775-13 : Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
ASTM    D 6777-02(2010)e1 : Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
ASTM    D 6778-12 : Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
ASTM    D 6779-12a : Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ASTM    D 6780/D 6780M-12 : Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM    D 6781-02(2007) : Standard Guide for Carbon Reactivation
ASTM    D 6782-05 : Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM    D 6783-05(2011) : Standard Specification for Polymer Concrete Pipe
ASTM    D 6784-02(2008) : Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
ASTM    D 6785-13 : Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
ASTM    D 6786-08 : Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM    D 6787/D 6787M-02(2012)E1 : Standard Specification for Repositionable Note Pad
ASTM    D 6788-02(2012) : Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM    D 6790/D 6790M-14 : Standard Test Method for Determining Poisson’s Ratio of Honeycomb Cores
ASTM    D 6791-11 : Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM    D 6792-13 : Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM    D 6793-02(2012) : Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
ASTM    D 6794-14 : Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time
ASTM    D 6795-13 : Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
ASTM    D 6796-02(2008) : Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
ASTM    D 6797-07(2011) : Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
ASTM    D 6798-02(2013) : Standard Terminology Relating to Flax and Linen
ASTM    D 6799-13 : Standard Terminology Relating to Inflatable Restraints
ASTM    D 6800-12 : Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
ASTM    D 6801-07 : Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
ASTM    D 6802-02(2010) : Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
ASTM    D 6803-13 : Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
ASTM    D 6804-02(2011) : Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM    D 6805-02(2008) : Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
ASTM    D 6806-02 (Reapproved 2012) : Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
ASTM    D 6807-02(2009) : Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 S/cm
ASTM    D 6808-02(2012) : Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
ASTM    D 6809-02(2012) : Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons  and Related Materials
ASTM    D 6810-13 : Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM    D 6812-04a(2010) : Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
ASTM    D 6813-02A(2013) : Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
ASTM    D 6814-02(2013) : Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
ASTM    D 6815-09 : Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM    D 6816-11 : Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
ASTM    D 6817/D 6817M-13A : Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM    D 6818-02(2009) : Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats
ASTM    D 6820-02(2007) : Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
ASTM    D 6821-12 : Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM    D 6822-12B : Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
ASTM    D 6823-08(2013) : Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
ASTM    D 6824-13E1 : Standard Test Method for Determining Filterability of Aviation Turbine Fuel
ASTM    D 6825-14 : Standard Guide for Placement of Riprap Revetments
ASTM    D 6826-05(2014)E1 : Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
ASTM    D 6827-02(2008) : Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
ASTM    D 6828-02(2011) : Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM    D 6829-02(2008) : Standard Tables of Body Measurements for Juniors, Sizes 0 to 19
ASTM    D 6830-02(2008) : Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
ASTM    D 6831-11 : Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM    D 6832-13E1 : Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
ASTM    D 6834-02(2008) : Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
ASTM    D 6835-08(2014) : Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM    D 6836-02(2008)e2 : Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM    D 6837-13 : Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
ASTM    D 6838-04(2010) : Standard Test Method for Cummins M11 High Soot Test
ASTM    D 6839-13 : Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
ASTM    D 6840-02(2013) : Standard Test Method for Effect of Drycleaning on Buttons
ASTM    D 6841-08 : Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
ASTM    D 6842-02(2007) : Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM    D 6843-10 : Standard Test Method for Silanes Used in Rubber Formulations <br> (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
ASTM    D 6844-10 : Standard Test Method for Silanes Used in Rubber Formulations <br> (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
ASTM    D 6845-12 : Standard Test Method for Silica, Precipitated, Hydrated&mdash;CTAB (Cetyltrimethylammonium Bromide) Surface Area
ASTM    D 6846-02(2012) : Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
ASTM    D 6849-13 : Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM    D 6850-13 : Standard Guide for QC of Screening Methods in Water
ASTM    D 6851-02(2011) : Standard Test Method for  Determination of Contact pH with Activated Carbon
ASTM    D 6854-12A : Standard Test Method for Silica-Oil Absorption Number
ASTM    D 6855-12 : Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM    D 6856/D 6856M-03(2008)e1 : Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
ASTM    D 6857/D 6857M-11 : Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM    D 6859-11 : Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
ASTM    D 6860/D 6860M-13 : Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky
ASTM    D 6862-11 : Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM    D 6864-11 : Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
ASTM    D 6865-11 : Standard Classification System and Basis for Specifications for Acrylonitrile<span class=’unicode’>&#x2013;</span>Styrene<span class=’unicode’>&#x2013;</span>Acrylate (ASA) and Acrylonitrile<span class=’unicode’>&#x2013;</span>EPDM<span class=
ASTM    D 6866-12 : Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM    D 6867-03(2009) : Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
ASTM    D 6868-11 : Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
ASTM    D 6869-03(2011) : Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM    D 6871-03(2008) : Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
ASTM    D 6873/D 6873M-08 : Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM    D 6874-12 : Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
ASTM    D 6875-12 : Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
ASTM    D 6877-13E1 : Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM    D 6878/D 6878M-13 : Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
ASTM    D 6880/D 6880M-11 : Standard Specification for Wood Boxes
ASTM    D 6881/D 6881M-03(2013) : Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
ASTM    D 6883-04(2012) : Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
ASTM    D 6884-03(2010) : Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
ASTM    D 6886-12 : Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
ASTM    D 6887-03(2013) : Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
ASTM    D 6888-09 : Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM    D 6889-03(2011) : Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)