List of ASTM Standard 11901 to 12000

ASTM    D 7129-09 : Standard Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator
ASTM    D 7131-09 : Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator
ASTM    D 7132-14 : Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
ASTM    D 7133-11 : Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM    D 7134-05 (Reapproved 2012) : Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
ASTM    D 7136/D 7136M-12 : Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM    D 7137/D 7137M-12 : Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM    D 7138-08 : Standard Test Method to Determine Melting Temperature of Synthetic Fibers
ASTM    D 7139-09(2013)E1 : Standard Terminology for Cotton Fibers
ASTM    D 7140/D 7140M-13 : Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials
ASTM    D 7142-05(2011) : Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
ASTM    D 7143-11 : Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM    D 7144-05a(2011) : Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
ASTM    D 7145-05(2010)e1 : Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
ASTM    D 7147-11 : Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
ASTM    D 7148-13 : Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM    D 7149-05(2011)e1 : Standard Practice for Determining the Freeze Thaw Stability of Adhesives
ASTM    D 7150-13 : Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
ASTM    D 7151-13 : Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM    D 7152-11 : Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
ASTM    D 7153-05(2010) : Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM    D 7154-05(2010) : Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM    D 7155-11 : Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM    D 7156-13 : Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM    D 7157-12 : Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
ASTM    D 7158/D 7158M-11 : Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift  Resistance Method)
ASTM    D 7160-05(2010) : Standard Practice for Determination of Expiration Dating for Medical Gloves
ASTM    D 7161-05(2010) : Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
ASTM    D 7163-11 : Standard Test Method for Specular Gloss of Printed Matter
ASTM    D 7164-10 : Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM    D 7165-10 : Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM    D 7166-10 : Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
ASTM    D 7167-12 : Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
ASTM    D 7168-11E1 : Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
ASTM    D 7169-11 : Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM    D 7170-12A : Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils – Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM    D 7171-05(2011) : Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM    D 7172-06e1 : Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
ASTM    D 7173-14 : Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
ASTM    D 7174-05(2011) : Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM    D 7175-08 : Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM    D 7176-06(2011) : Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM    D 7177-05(2010) : Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
ASTM    D 7178-06(2011) : Standard Practice for Determining the Number of Constrictions “<bdit>m</bdit>” of Non-Woven Geotextiles as a Complementary Filtration Property
ASTM    D 7179-07(2013) : Standard Test Method for Determining Geonet Breaking Force
ASTM    D 7180/D 7180M-05(2013)E1 : Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
ASTM    D 7181-11 : Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM    D 7183-12 : Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related         Chemicals by Ultraviolet Fluorescence
ASTM    D 7184-13 : Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM    D 7185-12 : Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
ASTM    D 7186-12 : Standard Practice for Quality Assurance Observation of Roof Construction and Repair
ASTM    D 7187-10 : Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
ASTM    D 7188-05(2010) : Standard Terminology for Printing Inks, Materials, and Processes
ASTM    D 7489-09(2013) : Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
ASTM    D 7189-12 : Standard Test Method for Relative Mileage of News Ink on Newsprint
ASTM    D 7190-10(2011) : Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
ASTM    D 7191-10 : Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
ASTM    D 7192-10 : Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement  Sensors
ASTM    D 7193-11 : Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM    D 7194-12 : Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
ASTM    D 7195-06(2012) : Standard Guide for Protocol for Setting Color Specifications for a Material
ASTM    D 7196-12 : Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
ASTM    D 7197-13 : Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
ASTM    D 7198-05(2012) : Standard Specification for Disposable Embalming Gloves for Single-Use Applications
ASTM    D 7199-07(2012) : Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
ASTM    D 7200-12 : Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
ASTM    D 7201-06(2011) : Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
ASTM    D 7202-14e1 : Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM    D 7203-11 : Standard Practice for Screening Trichloroethylene (TCE)-Contaminated  Media Using a Heated  Diode Sensor
ASTM    D 7204-07 : Standard Practice for Sampling Waste Streams on Conveyors
ASTM    D 7205/D 7205M-06(2011) : Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM    D 7206/D 7206M-06(2013)E1 : Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM    D 7208-14 : Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM    D 7209-06 : Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
ASTM    D 7210-13 : Standard Practice for Extraction of Additives in Polyolefin Plastics
ASTM    D 7211-13 : Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
ASTM    D 7212-13 : Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM    D 7213-12E1 : Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
ASTM    D 7214-07A(2012) : Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM    D 7216-13 : Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM    D 7217-11 : Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM    D 7219-08 : Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
ASTM    D 7220-12 : Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM    D 7223-11 : Standard Specification for Aviation Certification Turbine Fuel
ASTM    D 7224-13 : Standard Test Method for Determining Water Separation Characteristics of Kerosine- Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM    D 7225-13 : Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
ASTM    D 7226-13 : Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM    D 7227/D 7227M-11E1 : Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
ASTM    D 7228-06a(2011) : Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
ASTM    D 7229-08(2013)E1 : Standard Test Method for Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
ASTM    D 7230-06(2013) : Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
ASTM    D 7232-06(2012) : Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
ASTM    D 7233-08(2012) : Standard Test Method for Testing Fracture of Level Paintbrush Filaments
ASTM    D 7234-12 : Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM    D 7235-10 : Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM    D 7236-07(2013) : Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
ASTM    D 7237-10 : Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas  Diffusion Separation and Amperometric Detection
ASTM    D 7238-06(2012) : Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM    D 7239-13 : Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
ASTM    D 7240-06(2011) : Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)