List of ASTM Standard 4801 to 4900

ASTM    D 1387-89(2012) : Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
ASTM    F 1387-99(2012) : Standard Specification for  Performance of Piping and Tubing Mechanically Attached Fittings
ASTM    E 1388-12 : Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
ASTM    D 1388-08(2012) : Standard Test Method for Stiffness of Fabrics
ASTM    E 1390-12 : Standard Specification for Illuminators Used for Viewing Industrial Radiographs
ASTM    E 1391-03(2008) : Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates
ASTM    C 1392-00(2014) : Standard Guide for Evaluating Failure of Structural Sealant Glazing
ASTM    C 1393-14 : Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
ASTM    F 1394-92(2012) : Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM    C 1394-03(2012) : Standard Guide for In-Situ Structural Silicone Glazing Evaluation
ASTM    D 1394-76(2009) : Standard Test Methods for Chemical Analysis of White Titanium Pigments
ASTM    E 1395-90(2011) : Standard Test Method for Sensory Evaluation of Low Heat Chilies
ASTM    C 1396/C 1396M-14 : Standard Specification for Gypsum Board
ASTM    E 1396-90(2011) : Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
ASTM    F 1396-93(2012) : Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components
ASTM    F 1397-93(2012) : Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
ASTM    C 1397-13 : Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
ASTM    F 1398-93(2012) : Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components
ASTM    E 1399/E 1399M-97(2013)E1 : Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
ASTM    C 1399/C 1399M-10 : Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM    C 1400-11 : Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
ASTM    D 1401-12 : Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM    C 1401-14 : Standard Guide for Structural Sealant Glazing
ASTM    E 1402-13 : Standard Guide for Sampling Design
ASTM    C 1402-04(2009) : Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
ASTM    E 1403-97(2013) : Standard Specification for Laboratory Glass Boiling Flasks
ASTM    C 1403-13 : Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM    D 1403-10 : Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
ASTM    F 1404-92(2007) : Test Method for  Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
ASTM    D 1404/D 1404M-99(2008) : Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
ASTM    E 1404-94(2013) : Standard Specification for Laboratory Glass Conical Flasks
ASTM    D 1405/D 1405M-08(2013) : Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM    F 1405-08(2013) : Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products – Atlantek Method
ASTM    C 1405-14 : Standard Specification for Glazed Brick (Single Fired, Brick Units)
ASTM    E 1405-98(2010) : Standard Specification for Laboratory Glass Distillation Flasks
ASTM    E 1406-95(2010) : Standard Specification for Laboratory Glass Filter Flasks
ASTM    F 1407-12 : Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation – Permeation Cup Method
ASTM    C 1407-98(2011)e1 : Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
ASTM    F 1408-97(2013) : Standard Practice for Subcutaneous Screening Test for Implant Materials
ASTM    C 1408-09 : Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method
ASTM    E 1409-13 : Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
ASTM    C 1409-12 : Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
ASTM    F 1409-00(2010) : Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
ASTM    F 1410-98(2011) : Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
ASTM    C 1410-13 : Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
ASTM    C 1411-14 : Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
ASTM    E 1411-09 : Standard Practice for Qualification of Radioscopic Systems
ASTM    F 1411-11 : Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
ASTM    D 1411-09 : Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
ASTM    E 1412-12 : Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
ASTM    F 1412-09 : Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ASTM    D 1412-07 : Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C
ASTM    D 1413-07e1 : Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
ASTM    F 1413-07(2013) : Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
ASTM    C 1413-05(2011) : Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
ASTM    E 1413-13 : Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM    D 1414-94(2013) : Standard Test Methods for Rubber O-Rings
ASTM    F 1414-13 : Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing
ASTM    E 1414/E 1414M-11a : Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM    C 1414-01(2014) : Standard Practice for The Separation of Americium from Plutonium by Ion Exchange
ASTM    E 1415-91(2012) : Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3
ASTM    D 1415-06(2012) : Standard Test Method for Rubber Property—International Hardness
ASTM    C 1415-14 : Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry
ASTM    C 1416-04(2009) : Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
ASTM    F 1416-96(2014) : Standard Guide for Selection of Time-Temperature Indicators
ASTM    E 1416-09 : Standard Test Method for Radioscopic Examination of Weldments
ASTM    E 1417/E 1417M-13 : Standard Practice for Liquid Penetrant Testing
ASTM    F 1417-11a : Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
ASTM    C 1417-14 : Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM    C 1417M-14 : Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM    D 1417-10 : Standard Test Methods for Rubber Latices-Synthetic
ASTM    E 1418-10 : Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM    D 1418-10a : Standard Practice for Rubber and Rubber Latices-Nomenclature
ASTM    C 1419-99a(2009) : Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus
ASTM    E 1419-09 : Standard Practice for  Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
ASTM    C 1421-10 : Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM    E 1421-99(2009) : Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM    C 1422/C 1422M-10 : Standard Specification for Chemically Strengthened Flat Glass
ASTM    D 1422/D 1422M-13 : Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
ASTM    F 1422-08(2014) : Standard Guide for Using the Incident Command System Framework in Managing Search and Rescue Operations
ASTM    D 1423-02(2008) : Standard Test Method for  Twist in Yarns by Direct-Counting
ASTM    C 1423-98(2011) : Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM    F 1423-09 : Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers
ASTM    E 1423-14 : Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
ASTM    E 1424-91(2008) : Standard Test Method for  Determining the Rate of Air Leakage Through Exterior Windows, Curtain  Walls, and Doors Under Specified Pressure and Temperature Differences Across  the Specimen
ASTM    D 1424-09(2013) : Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM    F 1424-92(2011) : Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners
ASTM    C 1424-10 : Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM    F 1425-06(2011) : Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials
ASTM    C 1425-13 : Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
ASTM    D 1425/D 1425M-09e1 : Standard Test Method for  Unevenness of Textile Strands Using Capacitance Testing Equipment
ASTM    E 1425-07 : Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
ASTM    D 1426-08 : Standard Test Methods for Ammonia Nitrogen In Water
ASTM    E 1426-98(2009)e1 : Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
ASTM    F 1426-11 : Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
ASTM    C 1426-14 : Standard Practices for Verification and Calibration of Polarimeters
ASTM    F 1427-13 : Standard Consumer Safety Specification for Bunk Beds
ASTM    C 1427-13 : Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
ASTM    F 1428-92(2011) : Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM    E 1428-99(2009) : Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST