List of ASTM Standard 7101 to 7200
ASTM F 2313-10 : Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
ASTM E 2314-03(2008) : Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
ASTM F 2315-11 : Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
ASTM E 2315-03(2008) : Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure
ASTM F 2316-12 : Standard Specification for Airframe Emergency Parachutes
ASTM E 2316-03(2009) : Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM E 2317-04(2012) : Standard Guide for Conducting Renewal Microplate-Based Life-Cycle Toxicity Tests with a Marine Meiobenthic Copepod
ASTM F 2317/F 2317M-10 : Standard Specification for Design of Weight-Shift-Control Aircraft
ASTM D 2318-14 : Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
ASTM E 2319-04(2011) : Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM D 2319/D 2319M-14 : Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
ASTM E 2320-04 (Reapproved 2012) : Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
ASTM D 2320-98(2012) : Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM F 2320-11 : Standard Specification for Rubber Insulating Sheeting
ASTM E 2321-03(2011) : Standard Practice for Use of Test Methods <astmref rid=”a00002″> for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
ASTM F 2321-05(2013) : Standard Specification for Flexible Insulated Temporary By-Pass Jumpers
ASTM D 2321-11 : Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D 2322-14 : Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
ASTM E 2322-03(2009) : Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
ASTM F 2322-12 : Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
ASTM F 2324-13 : Standard Test Method for Prerinse Spray Valves
ASTM E 2324-04(2011) : Standard Guide for PDD Paired Testing
ASTM F 2325-03(2009) : Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
ASTM E 2326-14 : Standard Practice for Education and Training of Seized-Drug Analysts
ASTM F 2326-04(2009) : Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
ASTM E 2327-10 : Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
ASTM F 2327-08 : Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
ASTM F 2328M-07(2014) : Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs (Metric)
ASTM F 2328-05(2011) : Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
ASTM E 2329-10 : Standard Practice for Identification of Seized Drugs
ASTM F 2329-13 : Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM E 2330-12 : Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM F 2331-11 : Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
ASTM D 2331-08(2013) : Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
ASTM D 2332-13 : Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM F 2332-06(2013) : Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ASTM F 2333-04(2011) : Standard Test Method for Traction Characteristics of the Athletic Shoe–Sports Surface Interface
ASTM E 2334-09(2013)E1 : Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
ASTM F 2334-09 : Standard Guide for Above Ground Public Use Skatepark Facilities
ASTM E 2335-12 : Standard Guide for Laboratory Monitors
ASTM E 2336-04(2013) : Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM D 2337-01(2010) : Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
ASTM F 2337-11 : Standard Test Method for Treestand Fall Arrest System
ASTM E 2337/E 2337M-10 : Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing
ASTM E 2338-11 : Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards
ASTM D 2338-02(2013) : Standard Test Method for Determining Particle Size of Multicolor Lacquers
ASTM F 2338-09(2013) : Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM F 2339-06(2009) : Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
ASTM E 2339-11 : Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
ASTM D 2339-98(2011) : Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D 2340-13 : Standard Test Method for Peroxides in Styrene Monomer
ASTM F 2340-05(2010) : Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
ASTM E 2340/E 2340M-11E1 : Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E 2341/E 2341M-05(2009) : Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
ASTM F 2341-05(2010) : Standard Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
ASTM E 2342-10 : Standard Test Method for Durability Testing of Duct Sealants
ASTM F 2342/F 2342M-09 : Standard Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
ASTM D 2343-09 : Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
ASTM F 2343-09 : Standard Test Method for Livestock, Meat, and Poultry Evaluation Devices
ASTM D 2344/D 2344M-13 : Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM E 2344-04(2011) : Standard Guide for Data Capture through the Dictation Process
ASTM F 2345-03(2013) : Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
ASTM E 2346/E 2346M-14 : Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM F 2346-05(2011) : Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM D 2346-00(2012) : Standard Test Method for Apparent Density of Leather
ASTM D 2347-00(2010) : Standard Test Method for Measuring Area of Leather Test Specimens
ASTM E 2347-11 : Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM F 2347-11 : Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
ASTM F 2348-04(2010) : Standard Performance Specification for Privacy Padlocks
ASTM E 2348-06(2010) : Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
ASTM E 2349-12 : Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
ASTM D 2349-90(2014) : Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
ASTM F 2349-04(2010) : Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
ASTM E 2350-07(2013) : Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
ASTM D 2350-90(2010) : Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
ASTM F 2350-04(2010) : Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
ASTM E 2351-04A(2013) : Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings – Functionality
ASTM D 2351-90(2010) : Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
ASTM F 2352-11 : Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft
ASTM E 2352-04(2010) : Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
ASTM D 2352-85(2010) : Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
ASTM F 2353-05(2013) : Standard Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft
ASTM E 2353-06 : Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
ASTM F 2354-05B(2013) : Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft
ASTM D 2354-10E1 : Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
ASTM E 2354-10 : Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
ASTM E 2355-10 : Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
ASTM F 2355-13 : Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
ASTM E 2356-14 : Standard Practice for Comprehensive Building Asbestos Surveys
ASTM F 2356-05A(2013) : Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
ASTM E 2357-11 : Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
ASTM D 2357-11 : Standard for Qualitative Classification of Surfactants by Infrared Absorption
ASTM F 2357-10 : Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool “RCA” Abrader
ASTM E 2358-04(2010) : Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
ASTM D 2358-89(2009) : Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
ASTM F 2359-04(2011) : Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
ASTM D 2359-12 : Standard Specification for Refined Benzene-535
ASTM E 2359/E 2359M-13 : Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
ASTM E 2360-04(2010) : Specification for <i>Cryptolaemus montrouzieri</i> Mulsant (<i>Coleoptera: Coccinellidae</i>)
ASTM D 2360-11 : Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography