List of ASTM Standard 7201 to 7300

ASTM    F 2360-08 : Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
ASTM    E 2361-13 : Standard Guide for Testing Leave-On Products Using In-Situ Methods
ASTM    F 2361-03(2013) : Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service – Up to and Including Motors of 500 Horsepower
ASTM    F 2362-03(2013) : Standard Specification for Temperature Monitoring Equipment
ASTM    E 2362-09 : Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection
ASTM    F 2363/F 2363M-12 : Standard Specification for Sewage and Graywater Flow Through Treatment Systems
ASTM    E 2363-06a : Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
ASTM    D 2363-79(2011) : Standard Test Methods for Hydroxypropyl Methylcellulose
ASTM    E 2364-04(2010) : Standard Guide to Speech Recognition Technology Products in Health Care
ASTM    D 2364-01(2007)e1 : Standard Test Methods for Hydroxyethylcellulose
ASTM    E 2365-14 : Standard Guide for Environmental Compliance Performance Assessment
ASTM    F 2366-12 : Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus
ASTM    F 2367-04a(2010) : Standard Specification for Labeling for Upright Brooms for Consumer and Institutional Use
ASTM    E 2367-05(2014) : Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
ASTM    E 2368-10 : Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM    F 2368-04(2010) : Standard Specification for Labeling for Wet Mops for Consumer and Institutional Use
ASTM    E 2369-12 : Standard Specification for Continuity of Care Record (CCR)
ASTM    F 2369-04(2010) : Standard Safety Specification for Non-Integral Firearm Locking Devices
ASTM    D 2369-10e1 : Standard Test Method for  Volatile Content of Coatings
ASTM    D 2370-98(2010) : Standard Test Method for Tensile Properties of Organic Coatings
ASTM    F 2370-10 : Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
ASTM    F 2371-10 : Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
ASTM    D 2371-85(2010) : Standard Test Method for Pigment Content of Solvent-Reducible Paints
ASTM    E 2371-13 : Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM    F 2372-11a : Standard Consumer Safety Performance Specification for Shopping Carts
ASTM    D 2372-85(2010) : Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
ASTM    E 2373/E 2373M-14 : Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
ASTM    F 2373-11 : Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
ASTM    D 2373-05(2011) : Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
ASTM    D 2374-05(2011) : Standard Test Method for Lead in Paint Driers by EDTA Method
ASTM    F 2374-10 : Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
ASTM    E 2374-10 : Standard Guide for Acoustic Emission System Performance Verification
ASTM    E 2375-08(2013) : Standard Practice for Ultrasonic Testing of Wrought Products
ASTM    D 2375-05(2011) : Standard Test Method for Manganese in Paint Driers by EDTA Method
ASTM    F 2375-09 : Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
ASTM    F 2376-13 : Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
ASTM    E 2377-10 : Standard Specification for Shelter, Electrical Equipment, Lightweight
ASTM    D 2377-14 : Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM    E 2378-13 : Standard Practice for the Recognition of Impaired or Retired Personal Property
ASTM    F 2378-05(2011) : Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
ASTM    D 2378-07(2012) : Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited
ASTM    F 2379-04(2010) : Standard Test Method for Energy Performance of Powered Open Warewashing Sinks
ASTM    D 2379-09 : Standard Test Method for Acidity of Formaldehyde Solutions
ASTM    E 2380/E 2380M-09 : Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM    F 2380-04(2010) : Standard Test Method for Performance of Conveyor Toasters
ASTM    D 2380-04(2011) : Standard Test Method for Methanol Content of Formaldehyde Solutions
ASTM    F 2381-10 : Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM    E 2381-04(2010) : Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
ASTM    E 2382-04(2012) : Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
ASTM    F 2382-04(2010) : Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
ASTM    F 2383-11 : Standard Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)
ASTM    D 2383-14 : Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
ASTM    F 2384-10 : Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM    D 2384-83(2009) : Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
ASTM    E 2385-11 : Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
ASTM    F 2385-04(2010) : Standard Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
ASTM    D 2386-06(2012) : Standard Test Method for Freezing Point of Aviation Fuels
ASTM    E 2386-04(2011) : Standard Guide for the Conduct of PDD Screening Examinations
ASTM    E 2387-05(2011) : Standard Practice for Goniometric Optical Scatter Measurements
ASTM    F 2387-04(2012) : Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
ASTM    E 2388-11 : Standard Guide for  Minimum Training Requirements for Forensic Document Examiners
ASTM    F 2388-09 : Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
ASTM    F 2389-10 : Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
ASTM    F 2390-12 : Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
ASTM    E 2390-06 : Standard Guide for Examination of Documents Produced with Toner Technology
ASTM    F 2391-05(2011) : Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM    D 2392-96(2011) : Standard Test Method for Color Of Dyed Aviation Gasolines
ASTM    E 2392/E 2392M-10e1 : Standard Guide for Design of Earthen Wall Building Systems
ASTM    F 2392-04(2010) : Standard Test Method for Burst Strength of Surgical Sealants
ASTM    E 2393-10a : Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
ASTM    F 2393-12 : Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
ASTM    D 2394-05(2011) : Standard Test Methods for  Simulated Service Testing of Wood and Wood-Base Finish Flooring
ASTM    F 2394-07(2013) : Standard Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System
ASTM    E 2394-11 : Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
ASTM    E 2395-06(2013) : Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact
ASTM    F 2395-07 : Standard Terminology for Unmanned Air Vehicle Systems
ASTM    D 2395-14 : Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM    D 2396-94 (Reapproved 2012) : Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM    F 2396-11 : Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
ASTM    E 2396-11 : Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
ASTM    F 2397-09 : Standard Specification for Protective Headgear Used in Martial Arts
ASTM    D 2397/D 2397M-13 : Standard Specification for Cationic Emulsified Asphalt
ASTM    E 2397-11 : Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
ASTM    E 2398-11 : Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
ASTM    F 2398-11 : Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
ASTM    E 2399-11 : Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems
ASTM    D 2399-12 : Standard Practice for Selection of Cutback Asphalts
ASTM    E 2400-06 : Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
ASTM    F 2400-06(2011) : Standard Specification for Helmets Used in Pole Vaulting
ASTM    D 2400-99(2004) : Standard Specification for Varnished Glass-Polyester Cloth Used for Electrical Insulation
ASTM    F 2401-04(2010) : Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
ASTM    E 2402-11 : Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM    D 2402-07(2012) : Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)
ASTM    E 2403-06(2012) : Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM    F 2403-09 : Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
ASTM    E 2404-13E1 : Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Characteristics
ASTM    F 2405-04(2011) : Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM    F 2406-04(2012) : Standard Practice for Determining Yield of Solid Ink Sticks
ASTM    E 2406-09 : Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
ASTM    E 2407-04(2009) : Standard Test Method for Effectiveness of Defoaming Agents

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST