List of ASTM Standard 9601 to 9700

ASTM    D 4428/D 4428M-14 : Standard Test Methods for Crosshole Seismic Testing
ASTM    D 4429-09a : Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
ASTM    D 4430-00(2010) : Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM    D 4434/D 4434M-12 : Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
ASTM    D 4435-13E1 : Standard Test Method for Rock Bolt Anchor Pull Test
ASTM    D 4436-13E1 : Standard Test Method for Rock Bolt Long-Term Load Retention Test
ASTM    D 4437-08(2013) : Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
ASTM    D 4438-13 : Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM    D 4439-14 : Standard Terminology for Geosynthetics
ASTM    D 4440-08 : Standard Test Method for  Plastics: Dynamic Mechanical Properties Melt Rheology
ASTM    D 4441-04(2010) : Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
ASTM    D 4442-07 : Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM    D 4443-13 : Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
ASTM    D 4444-08 : Standard Test Method for  Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM    D 4445-10 : Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
ASTM    D 4446/D 4446M-13 : Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
ASTM    D 4447-10 : Standard Guide for  Disposal of Laboratory Chemicals and Samples
ASTM    D 4448-01(2007) : Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM    D 4449-08 : Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM    D 4450-85(2012) : Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
ASTM    D 4451-02(2014) : Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
ASTM    D 4452-06 : Standard Practice for X-Ray Radiography of Soil Samples
ASTM    D 4453-11 : Standard Practice for  Handling of High Purity Water Samples
ASTM    D 4454-85(2009) : Standard Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy
ASTM    D 4455-85(2014) : Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure
ASTM    D 4456-99(2009)e1 : Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
ASTM    D 4457-02(2014) : Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
ASTM    D 4458-09 : Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
ASTM    D 4459-12 : Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
ASTM    D 4460-97(2009) : Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM    D 4462-02(2012) : Standard Specification for Zinc Hydroxy Phosphite Pigment
ASTM    D 4463/D 4463M-96(2013)E1 : Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM    D 4464-10 : Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering
ASTM    D 4465-05(2010) : Standard Performance Specification for Zippers for Denim Dungarees
ASTM    D 4466-02(2012) : Standard Terminology Related to Multicomponent Textile Fibers
ASTM    D 4468-85(2011) : Standard Test Method for  Total Sulfur in Gaseous Fuels by Hydrogenolysis and<br>  Rateometric Colorimetry
ASTM    D 4469-11 : Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
ASTM    D 4470-97(2010) : Standard Test Method for Static Electrification
ASTM    D 4471-10 : Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
ASTM    D 4472-08(2014) : Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems
ASTM    D 4473-08 : Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
ASTM    D 4475-02(2008) : Standard Test Method for  Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM    D 4476/D 4476M-14 : Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM    D 4477-09 : Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
ASTM    D 4479/D 4479M-07 (Reapproved 2012)e1 : Standard Specification for Asphalt Roof Coatings – Asbestos-Free
ASTM    D 4481-10 : Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM    D 4482-11 : Test Method for  Rubber Property<char: emdash>Extension Cycling Fatigue
ASTM    D 4483-14 : Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM    D 4485-11c : Standard Specification for Performance of Active API Service Category Engine Oils
ASTM    D 4486-10 : Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM    D 4487-90(2008) : Standard Test Methods for Analysis of Calcium Borosilicate
ASTM    D 4489-95(2011) : Standard Practices for Sampling of Waterborne Oils
ASTM    D 4490-96(2011) : Standard Practice for  Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM    D 4491-99A(2014)E1 : Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM    D 4492-10 : Standard Test Method for Analysis of Benzene by Gas Chromatography
ASTM    D 4493-12 : Standard Test Method for Solidification Point of Bisphenol A (4,4*-Isopropylidenediphenol)
ASTM    D 4494-95(2010)e1 : Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
ASTM    D 4495-12 : Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM    D 4496-13 : Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM    D 4497-10 : Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
ASTM    D 4498-07 : Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM    D 4499-07 : Standard Test Method for Heat Stability of Hot-Melt Adhesives
ASTM    D 4501-01(2014) : Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM    D 4502-92(2011) : Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
ASTM    D 4504-94(2011) : Standard Specification for  Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM    D 4505-12 : Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
ASTM    D 4506-13E1 : Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
ASTM    D 4508-10 : Standard Test Method for Chip Impact Strength of Plastics
ASTM    D 4510-05(2009) : Standard Test Method for Counting Partial Cleavages in Wool and Other Animal Fibers
ASTM    D 4511-11 : Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
ASTM    D 4512-03(2013)E1 : Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM    D 4513-11 : Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM    D 4514-12 : Standard Specification for  Friction Tape
ASTM    D 4516-00(2010) : Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM    D 4517-04(2009) : Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM    D 4519-10 : Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM    D 4520-13 : Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
ASTM    D 4522-14 : Standard Performance Specification for Feather and Down Fillings for Textile Products
ASTM    D 4524-86(2012) : Standard Test Method for  Composition of Plumage
ASTM    D 4525-13E1 : Standard Test Method for Permeability of Rocks by Flowing Air
ASTM    D 4526-12 : Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
ASTM    D 4527-99(2011) : Standard Test Method for  Carbon Black<char: emdash>Solvent Extractables
ASTM    D 4528-88(2012) : Standard Classification for  Rubber Compounding Materials&mdash;Sulfur
ASTM    D 4529-01(2011) : Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM    D 4530-11 : Standard Test Method for Determination of Carbon Residue (Micro Method)
ASTM    D 4531-86(2008) : Standard Test Methods for  Bulk Density of Peat and Peat Products
ASTM    D 4532-10 : Standard Test Method for  Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM    D 4533-11 : Standard Test Method for  Trapezoid Tearing Strength of Geotextiles
ASTM    D 4535-13E1 : Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM    D 4537-12 : Standard Guide for  Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
ASTM    D 4538-13 : Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM    D 4539-10 : Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM    D 4541-09e1 : Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM    D 4542-07 : Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
ASTM    D 4543-08 : Standard Practices for  Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
ASTM    D 4544-12 : Standard Practice for Estimating Peat Deposit Thickness
ASTM    D 4546-14 : Standard Test Methods for One-Dimensional Swell or Collapse of Soils
ASTM    D 4547-09 : Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM    D 4548-11 : Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
ASTM    D 4549-11 : Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)