List of ASTM Standard 2701 to 2800
ASTM E 780-06(2011) : Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
ASTM F 780-93a(2012) : Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
ASTM C 780-14 : Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
ASTM B 780-98(2010) : Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy
ASTM A 780/A 780M-09 : Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A 781/A 781M-14A : Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM C 781-08 : Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
ASTM E 781-86(2009) : Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
ASTM B 781-93a(2012) : Standard Guide for Silver-Cadmium Oxide Contact Material
ASTM E 782-95(2007) : Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
ASTM F 782-01(2012) : Standard Specification for Doors, Furniture, Marine
ASTM C 782-13 : Standard Test Method for Softness of Preformed Tape Sealants
ASTM F 783-88(2013) : Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
ASTM E 783-02(2010) : Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
ASTM C 783-85(2010)e1 : Standard Practice for Core Sampling of Graphite Electrodes
ASTM B 783-13 : Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
ASTM E 784-89(2011) : Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM B 784-01(2012) : Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM C 784-05(2012) : Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
ASTM E 785-81(2011) : Standard Specification for Crucibles, Ignition, Laboratory, Metal
ASTM D 785-08 : Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM C 785-08 : Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
ASTM C 786/C 786M-10 : Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
ASTM E 786-81(2011) : Standard Specification for Dishes, Evaporating, Platinum
ASTM B 786/B 786M-08(2013)E1 : Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
ASTM A 786/A 786M-05(2009) : Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
ASTM E 787-81(2011) : Standard Specification for Disposable Glass Micro Blood Collection Pipets
ASTM C 787-11 : Standard Specification for Uranium Hexafluoride for Enrichment
ASTM B 787/B 787M-04(2009) : Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
ASTM A 787/A 787M-14 : Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM D 787-12 : Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
ASTM E 788-97(2013) : Standard Specification for Pipet, Blood Diluting
ASTM A 788/A 788M-14 : Standard Specification for Steel Forgings, General Requirements
ASTM D 788-12 : Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM B 788/B 788M-09(2014) : Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
ASTM C 788-03(2009) : Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
ASTM F 788-13 : Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
ASTM D 789-07e1 : Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
ASTM A 789/A 789M-13AE1 : Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM B 789/B 789M-99(2011) : Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
ASTM B 790/B 790M-11 : Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM A 790/A 790M-14 : Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM F 790-08(2013) : Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM E 790-08 : Standard Test Method for Residual Moisture in a Refuse-Derived Fuel Analysis Sample
ASTM D 790-10 : Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM F 791-96(2013) : Standard Test Method for Stress Crazing of Transparent Plastics
ASTM C 791-12 : Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
ASTM E 791-08 : Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM C 792-04(2008) : Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM F 792-08 : Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
ASTM D 792-13 : Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM A 792/A 792M-10 : Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM B 792-13 : Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
ASTM C 793-05(2010) : Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM A 793-96(2014) : Standard Specification for Rolled Floor Plate, Stainless Steel
ASTM B 793-13 : Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM F 793-10a : Standard Classification of Wall Covering by Use Characteristics
ASTM E 793-06(2012) : Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM A 794/A 794M-12 : Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
ASTM B 794-97(2009) : Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
ASTM E 794-06(2012) : Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
ASTM C 794-10 : Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM F 794-03(2009) : Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM A 795/A 795M-13 : Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
ASTM E 795-05(2012) : Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM B 795-13 : Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
ASTM C 795-08(2013) : Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C 796/C 796M-12 : Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM A 796/A 796M-13A : Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM B 796-07 : Standard Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (PF) Applications
ASTM E 797/E 797M-10 : Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM B 797-93(2007) : Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
ASTM E 798-96(2009) : Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
ASTM B 798-95(2009) : Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM A 798/A 798M-13 : Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
ASTM A 799/A 799M-10 : Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
ASTM C 799-12 : Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
ASTM F 799-11 : Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
ASTM E 799-03(2009) : Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM B 799-95(2009) : Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ASTM C 800-08 : Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
ASTM E 800-07 : Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM B 800-05(2011) : Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes<char: emdash>Annealed and Intermediate Tempers
ASTM D 800-05(2014) : Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
ASTM A 800/A 800M-14 : Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
ASTM E 801-06(2011) : Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
ASTM B 801-07(2012) : Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM A 801-14 : Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
ASTM F 801-96(2008) : Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D 801-02(2013) : Standard Test Methods for Sampling and Testing Dipentene
ASTM C 802-09a : Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM A 802/A 802M-95(2010)e1 : Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
ASTM B 802/B 802M-10 : Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM E 802-95(2010) : Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness
ASTM D 802-02(2013) : Standard Test Methods for Sampling and Testing Pine Oils
ASTM E 803-91(2013) : Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
ASTM D 803-12 : Standard Test Methods for Testing Tall Oil
ASTM B 803/B 803M-08E1 : Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM F 803-11 : Standard Specification for Eye Protectors For Selected Sports
ASTM C 803/C 803M-03(2010) : Standard Test Method for Penetration Resistance of Hardened Concrete