List of ASTM Standard 1301 to 1400
ASTM C 412M-11 : Standard Specification for Concrete Drain Tile (Metric)
ASTM C 412-11 : Standard Specification for Concrete Drain Tile
ASTM D 412-06A(2013) : Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension
ASTM F 412-13 : Standard Terminology Relating to Plastic Piping Systems
ASTM C 413-01(2012) : Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 413-98(2013) : Standard Test Methods for Rubber Property – Adhesion to Flexible Substrate
ASTM B 413-97A(2012) : Standard Specification for Refined Silver
ASTM E 413-10 : Classification for Rating Sound Insulation
ASTM A 413/A 413M-07(2012) : Standard Specification for Carbon Steel Chain
ASTM C 414-03(2012) : Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
ASTM F 414-09 : Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
ASTM A 414/A 414M-13 : Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
ASTM E 415-14 : Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM B 415-98(2013) : Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
ASTM F 415-87(2010) : Standard Test Method for Curl in Carbon Paper
ASTM C 416-97(2013) : Standard Classification of Silica Refractory Brick
ASTM A 416/A 416M-12A : Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
ASTM B 416-98(2013) : Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
ASTM C 417-05(2010)e1 : Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM B 417-13 : Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM C 418-12 : Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
ASTM A 418/A 418M-10 : Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
ASTM B 418-12 : Standard Specification for Cast and Wrought Galvanic Zinc Anodes
ASTM C 419-08(2013) : Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM A 420/A 420M-13 : Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM F 420-04(2009) : Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
ASTM C 421-08(2014) : Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
ASTM A 421/A 421M-10 : Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
ASTM F 421-07(2013)E1 : Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
ASTM D 421-85(2007) : Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D 422-63(2007)E1 : Standard Test Method for Particle-Size Analysis of Soils
ASTM B 422/B 422M-10E1 : Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
ASTM E 422-05(2011) : Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM B 423-11 : Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy<br> (UNS N08825, N08221, and N06845) Seamless Pipe and Tube
ASTM A 423/A 423M-09(2014) : Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
ASTM E 423-71(2014) : Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM C 423-09a : Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM A 424/A 424M-09a : Standard Specification for Steel, Sheet, for Porcelain Enameling
ASTM C 424-93(2012) : Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
ASTM E 424-71(2007) : Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
ASTM B 424-11 : Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and <br> UNS N06845) Plate, Sheet, and Strip
ASTM B 425-11 : Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar
ASTM D 425-88(2008) : Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM C 425-04(2013) : Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
ASTM C 426-10 : Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
ASTM A 426/A 426M-13 : Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
ASTM E 426-12 : Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
ASTM A 427/A 427M-10 : Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
ASTM B 427-09 : Standard Specification for Gear Bronze Alloy Castings
ASTM A 428/A 428M-10 : Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM E 428-08(2013) : Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
ASTM B 428-09(2013) : Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube
ASTM F 428-09 : Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM C 428/C 428M-05(2011)e1 : Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
ASTM B 429/B 429M-10e1 : Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM F 429-10 : Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football
ASTM C 429-01(2011) : Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
ASTM D 429-14 : Standard Test Methods for Rubber Property – Adhesion to Rigid Substrates
ASTM E 430-11 : Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM C 430-08 : Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM D 430-06(2012) : Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
ASTM F 430-13 : Standard Specification for Paper Used for Vacuum Cleaner Filter Bags
ASTM F 431-04(2013) : Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
ASTM E 431-96(2011) : Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices
ASTM F 432-13 : Standard Specification for Roof and Rock Bolts and Accessories
ASTM B 432-09a : Standard Specification for Copper and Copper Alloy Clad Steel Plate
ASTM E 432-91(2011) : Standard Guide for Selection of a Leak Testing Method
ASTM E 433-71(2013) : Standard Reference Photographs for Liquid Penetrant Inspection
ASTM F 433-02(2009) : Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM F 434-93(2009) : Standard Test Method for Blow-Out Testing of Preformed Gaskets
ASTM E 434-10 : Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM B 434-06(2011) : Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
ASTM A 434-06(2012) : Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
ASTM A 435/A 435M-90(2012) : Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM B 435-06(2011)E1 : Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
ASTM E 436-03(2008) : Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM A 436-84(2011) : Standard Specification for Austenitic Gray Iron Castings
ASTM F 436-11 : Standard Specification for Hardened Steel Washers
ASTM F 436M-11 : Standard Specification for Hardened Steel Washers [Metric]
ASTM F 437-09 : Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM A 437/A 437M-12 : Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
ASTM F 438-09 : Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
ASTM E 438-92(2011) : Standard Specification for Glasses in Laboratory Apparatus
ASTM B 438-13 : Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM F 439-13 : Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM B 439-12 : Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM E 439-10 : Standard Test Methods for Chemical Analysis of Beryllium
ASTM A 439-83(2009) : Standard Specification for Austenitic Ductile Iron Castings
ASTM D 440-07(2012) : Standard Test Method of Drop Shatter Test for Coal
ASTM B 440-12 : Standard Specification for Cadmium
ASTM D 441-07(2012) : Standard Test Method of Tumbler Test for Coal
ASTM C 441/C 441M-11 : Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
ASTM F 441/F 441M-13E1 : Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
ASTM B 441-04(2010) : Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
ASTM F 442/F 442M-13E1 : Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
ASTM C 443M-11 : Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
ASTM C 443-12 : Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM B 443-00(2009) : Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
ASTM B 444-06(2011) : Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
ASTM D 444-88(2008) : Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)