List of ASTM Standard 11501 to 11600

ASTM    D 6662-13 : Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
ASTM    D 6663-08(2013) : Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
ASTM    D 6665-09 : Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM    D 6666-04(2009) : Standard Guide for Evaluation of Aqueous Polymer Quenchants
ASTM    D 6667-10 : Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM    D 6668-01(2010) : Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
ASTM    D 6669-12 : Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
ASTM    D 6670-13 : Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
ASTM    D 6671/D 6671M-13 : Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM    D 6672-08 : Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines
ASTM    D 6673-10 : Standard Practice for Sewn Products Pattern Data Interchange-Data Format
ASTM    D 6674-01(2013) : Standard Guide for Proficiency Test Program for Fabrics
ASTM    D 6675-01(2011) : Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings   on Automotive Sheet Steel
ASTM    D 6676/D 6676M-13 : Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
ASTM    D 6677-07(2012) : Standard Test Method for Evaluating Adhesion by Knife
ASTM    D 6681-14 : Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine – Caterpillar 1P Test Procedure
ASTM    D 6682-08 : Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM    D 6683-14 : Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM    D 6684-04(2010) : Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
ASTM    D 6685-01(2008) : Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
ASTM    D 6686-01(2013) : Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
ASTM    D 6687-07(2013) : Standard Guide for Testing Printing Ink Vehicles and Components Thereof
ASTM    D 6688-11 : Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich   Technique
ASTM    D 6689-01(2011) : Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
ASTM    D 6690-12 : Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
ASTM    D 6691-09 : Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
ASTM    D 6693-04(2010) : Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM    D 6694/D 6694M-08(2013)E1 : Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
ASTM    D 6695-08 : Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM    D 6696-14 : Standard Guide for Understanding Cyanide Species
ASTM    D 7027-13 : Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM    D 6698-14 : Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
ASTM    D 6699-01(2010) : Standard Practice for Sampling Liquids Using Bailers
ASTM    D 6700-01(2013) : Standard Practice for Use of Scrap Tire-Derived Fuel
ASTM    D 6703-14 : Standard Test Method for Automated Heithaus Titrimetry
ASTM    D 6704-08 : Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM    D 6705/D 6705M-04(2011)e1 : Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
ASTM    D 6706-01(2013) : Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM    D 6707-06(2011) : Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
ASTM    D 6708-13 : Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM    D 6709-14 : Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ASTM    D 6710-02(2012) : Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
ASTM    D 6711-01(2008) : Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
ASTM    D 6712-01(2009) : Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM    D 6713-14 : Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
ASTM    D 6714-01(2010)e1 : Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
ASTM    D 6715-13 : Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests
ASTM    D 6716-08(2013) : Standard Test Method for Total Ash in Wet Blue or Wet White
ASTM    D 6717-07(2012) : Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM    D 6719-12 : Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
ASTM    D 6720-07(2012) : Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
ASTM    D 6721-01(2006) : Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
ASTM    D 6722-11 : Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
ASTM    D 6723-12 : Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM    D 6724-04(2010) : Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM    D 6725-04(2010) : Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM    D 6726-01(2007) : Standard Guide for Conducting Borehole Geophysical Logging<char: emdash>Electromagnetic Induction
ASTM    D 6727-01(2007) : Standard Guide for Conducting Borehole Geophysical Logging<char: emdash>Neutron
ASTM    D 6728-11 : Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM    D 6729-04(2009) : Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM    D 6730-01(2011) : Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100&#0150;Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM    D 6732-04(2010) : Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM    D 6731-01(2011) : Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
ASTM    D 6736-08(2013) : Standard Test Method for Burnish Resistance of Latex Paints
ASTM    D 6733-01(2011) : Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM    D 6734-01(2009) : Standard Test Method for Low Levels of Coliphages in Water
ASTM    D 6735-01(2009) : Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources&#8212;Impinger Method
ASTM    D 6737-12 : Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
ASTM    D 6738-11 : Standard Test Method for Precipitated Silica<char: emdash>Volatile Content
ASTM    D 6739-11 : Standard Test Method for Silica<char: emdash>pH Value
ASTM    D 6740-10 : Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM    D 6741-10 : Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM    D 6742/D 6742M-12 : Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM    D 6743-11 : Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM    D 6744-06(2011)e1 : Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM    D 6745-11 : Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM    D 6746-10 : Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
ASTM    D 6747-12 : Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes
ASTM    D 6748-02A(2012) : Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM    D 6749-02(2012) : Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
ASTM    D 6751-12 : Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM    D 6752/D 6752M-11 : Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures  Using Automatic Vacuum Sealing Method
ASTM    D 6750-14 : Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine – 1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
ASTM    D 6753/D 6753M-02(2009) : Standard Specification for Coal Tar Adhesive
ASTM    D 6754/D 6754M-10 : Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
ASTM    D 6756-10 : Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM    D 6757-07(2013) : Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
ASTM    D 6758-08 : Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM    D 6759-09 : Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM    D 6760-14 : Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
ASTM    D 6761-07(2012) : Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM    D 6762-02a(2009)e1 : Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM    D 6763-08 : Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
ASTM    D 6764-02(2013) : Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and Ph Data from Open Channels
ASTM    D 6765-13 : Standard Practice for Live Staking
ASTM    D 6766-12 : Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
ASTM    D 6767-11 : Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM    D 6768-04(2009) : Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
ASTM    D 6769/D 6769M-02(2010)e1 : Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
ASTM    D 6770-07(2011) : Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST