List of ASTM Standard 12101 to 12200

ASTM    D 7352-07(2012) : Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
ASTM    D 7353-07(2013) : Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
ASTM    D 7354-11 : Standard Guide for Artists<span class=’unicode’>&#x2019;</span> Paint Waste Disposal in Private, Non-Commercial Settings
ASTM    D 7355-10 : Standard Guide for Artists’ Paint Waste Disposal in Smaller Commercial or Educational Settings
ASTM    D 7356/D 7356M-13 : Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
ASTM    D 7357-07(2012) : Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
ASTM    D 7358-07(2013) : Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
ASTM    D 7359-13 : Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM    D 7360-11 : Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM    D 7361-07(2012) : Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM    D 7362-07 : Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition
ASTM    D 7363-13A : Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
ASTM    D 7365-09a : Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM    D 7366-08(2013) : Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
ASTM    D 7367-14 : Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM    D 7369-11 : Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM    D 7370-09 : Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM    D 7371-12 : Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
ASTM    D 7372-12 : Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM    D 7373-12 : Standard Test Method for Predicting Biodegradability of Lubricants Using a Biokinetic Model
ASTM    D 7374-08 : Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
ASTM    D 7375-08 : Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration
ASTM    D 7376-10a : Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM    D 7377-09(2013) : Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
ASTM    D 7378-10 : Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM    D 7379-08 : Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
ASTM    D 7380-08 : Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM    D 7381-07(2013) : Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
ASTM    D 7382-08 : Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
ASTM    D 7383-10 : Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
ASTM    D 7385-13 : Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion
ASTM    D 7386-12 : Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
ASTM    D 7387-13 : Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
ASTM    D 7388-08(2013) : Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
ASTM    D 7389-07(2012) : Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
ASTM    D 7390-07(2012) : Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM    D 7391-09 : Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM    D 7392-07 : Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
ASTM    D 7393-07(2012) : Standard Practice for Indicating Oil in Abrasives
ASTM    D 7394-13 : Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
ASTM    D 7395-07(2012) : Standard Test Method for Cone/Plate Viscosity at a  500 s<sup>-1</sup> Shear Rate
ASTM    D 7396-08 : Standard Guide for  Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM    D 7397-10 : Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
ASTM    D 7398-11 : Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615<span class=’unicode’>&#x00B0;</span>C by Gas Chromatography
ASTM    D 7399-08 : Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM    D 7400-08 : Standard Test Methods for Downhole Seismic Testing
ASTM    D 7401-08 : Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM    D 7402-09 : Standard Practice for Identifying Cationic Emulsified Asphalts
ASTM    D 7403-09 : Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
ASTM    D 7404-07(2012) : Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM    D 7405-10a : Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a  Dynamic Shear Rheometer  <a href=”#fn00002″></a>
ASTM    D 7406-07(2012) : Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
ASTM    D 7407-07(2012) : Standard Guide for Determining  The Transmission of Gases Through Geomembranes
ASTM    D 7408-12 : Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
ASTM    D 7409-07e1 : Standard Test Method for  Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ASTM    D 7410-07(2012) : Standard Practice for Qualification of Cotton Classification Instruments for Cotton Marketing
ASTM    D 7412-09 : Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM    D 7414-09 : Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM    D 7415-09 : Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM    D 7416-09 : Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric  Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic  Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orb
ASTM    D 7417-10 : Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM    D 7418-12 : Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM    D 7419-13 : Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
ASTM    D 7420-11 : Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM    D 7421-11 : Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM    D 7422-14 : Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM    D 7423-09 : Standard Test Method for  Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM    D 7425/D 7425M-13 : Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
ASTM    D 7426-08(2013) : Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM    D 7427-08e2 : Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
ASTM    D 7428-08e1 : Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM    D 7430-13 : Standard Practice for Mechanical Sampling of Coal
ASTM    D 7433-13 : Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
ASTM    D 7434-08 : Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
ASTM    D 7435-08 : Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers
ASTM    D 7436-12 : Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM    D 7437-08(2013) : Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
ASTM    D 7438-08 : Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
ASTM    D 7439-14 : Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM    D 7440-08 : Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM    D 7441-08(2013) : Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples
ASTM    D 7442-08a : Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites  for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy
ASTM    D 7444-11 : Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
ASTM    D 7445-09 : Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
ASTM    D 7446-09 : Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented    Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core   Materials
ASTM    D 7447-08(2014) : Standard Practice for Symbolizing Adhesive Applications
ASTM    D 7448-09 : Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
ASTM    D 7481-09 : Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
ASTM    D 7449/D 7449M-08e1 : Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM    D 7450-13 : Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
ASTM    D 7451-08A(2013) : Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
ASTM    D 7452-12 : Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM    D 7453-09 : Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
ASTM    D 7454-08 : Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using    a Semi-Automated Apparatus
ASTM    D 7455-14 : Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM    D 7457-12 : Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals  by Microcoulometry
ASTM    D 7458-14 : Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM    D 7459-08 : Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
ASTM    D 7460-10 : Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
ASTM    D 7462-11 : Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with  Middle Distillate Petroleum Fuel (Accelerated Method)

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST