List of ASTM Standard 1401 to 1500

ASTM    F 444-88(2009) : Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
ASTM    C 444-03(2009) : Standard Specification for Perforated Concrete Pipe
ASTM    E 444-09 : Standard Guide for Scope of Work of Forensic Document Examiners
ASTM    E 445/E 445M-88(2013) : Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
ASTM    D 445-12 : Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM    F 445-88(2009) : Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
ASTM    B 446-03(2008)e1 : Standard Specification for  Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon  Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
ASTM    E 446-10 : Standard Reference Radiographs for  Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM    F 446-85(2009) : Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
ASTM    D 446-12 : Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
ASTM    A 447/A 447M-11 : Standard Specification for  Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
ASTM    C 447-03(2010) : Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM    B 447-12A : Standard Specification for Welded Copper Tube
ASTM    E 448-82(2008) : Standard Practice for Scleroscope Hardness Testing of Metallic Materials
ASTM    C 448-88(2011)e1 : Standard Test Methods for Abrasion Resistance of Porcelain Enamels
ASTM    D 448-12 : Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM    F 448-11 : Test Method for Measuring Steady-State Primary Photocurrent
ASTM    D 449/D 449M-03(2014)E1 : Standard Specification for Asphalt Used in Dampproofing and Waterproofing
ASTM    C 449-07(2013) : Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
ASTM    E 449-08(2013) : Standard Test Methods for Analysis of Calcium Chloride
ASTM    B 449-93(2010)e1 : Standard Specification for Chromates on Aluminum
ASTM    A 449-10 : Standard Specification for  Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM    F 449-02(2008) : Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM    F 450-13 : Standard Test Methods for Vacuum Cleaner Hose – Durability and Reliability (Plastic)
ASTM    A 450/A 450M-10 : Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
ASTM    C 450-08(2014) : Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
ASTM    D 450/D 450M-07(2013)E1 : Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
ASTM    D 451/D 451M-91(2013)E1 : Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM    A 451/A 451M-06(2010) : Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
ASTM    F 451-08 : Standard Specification for  Acrylic Bone Cement
ASTM    C 451-13 : Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
ASTM    E 452-02(2013) : Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
ASTM    B 452-09 : Standard Specification for Copper-Clad Steel Wire for Electronic Application
ASTM    F 452-76(2008) : Standard Specification for  Preformed Cranioplasty Plates
ASTM    C 452/C 452M-10 : Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
ASTM    D 452/D 452M-91(2013)E1 : Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM    A 453/A 453M-12 : Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
ASTM    B 453/B 453M-11E1 : Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM    C 454-10 : Standard Test Method for  Disintegration of Carbon Refractories by Alkali
ASTM    E 454-12 : Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM    D 454-04(2010) : Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM    C 455-07(2013) : Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
ASTM    A 455/A 455M-12A : Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
ASTM    E 455-11 : Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
ASTM    B 455-10 : Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM    C 456-13 : Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
ASTM    A 456/A 456M-08(2013) : Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM    B 456-11e1 : Standard Specification for  Electrodeposited Coatings of Copper Plus Nickel Plus<br>  Chromium and Nickel Plus Chromium
ASTM    E 456-13AE1 : Standard Terminology Relating to Quality and Statistics
ASTM    B 457-67(2013) : Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM    C 457/C 457M-12 : Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
ASTM    E 457-08 : Standard Test Method for  Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM    F 457-04(2010) : Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
ASTM    E 458-08 : Standard Test Method for  Heat of Ablation
ASTM    F 458-06 : Standard Practice for Nondestructive Pull Testing of Wire Bonds
ASTM    C 458/C 458M-98(2011)e1 : Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM    C 459/C 459M-97(2011)e1 : Standard Test Methods for Asbestos-Cement Flat Products
ASTM    D 459-09 : Standard Terminology Relating to Soaps and Other Detergents  <a href=”#fn00002″></a>
ASTM    A 459-08(2013) : Standard Specification for Zinc-Coated Flat Steel Armoring Tape
ASTM    F 459-13 : Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM    E 459-05(2011) : Standard Test Method for  Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM    E 460-12 : Standard Practice for Determining Effect of Packaging on Food and Beverage Products During Storage
ASTM    A 460-11 : Standard Specification for Copper-Clad Steel Wire Strand
ASTM    D 460-91(2014) : Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
ASTM    C 461-81(2008) : Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM    F 462-79(2007) : Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
ASTM    B 462-10E2 : Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031,
ASTM    B 463-10 : Standard Specification for  UNS N08020 Alloy Plate, Sheet, and Strip
ASTM    E 463-09 : Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry
ASTM    A 463/A 463M-10 : Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
ASTM    B 464-10 : Standard Specification for Welded UNS N08020 Alloy Pipe
ASTM    D 464-05(2010) : Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products
ASTM    C 465-10 : Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
ASTM    B 465-11 : Standard Specification for  Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM    E 465-11 : Standard Test Methods for  Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
ASTM    D 465-05(2010) : Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
ASTM    B 466/B 466M-14 : Standard Specification for Seamless Copper-Nickel Pipe and Tube
ASTM    E 466-07 : Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM    C 466-03(2012) : Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
ASTM    A 466/A 466M-07(2012) : Standard Specification for Weldless Chain
ASTM    F 467M-06A(2012) : Standard Specification for Nonferrous Nuts for General Use (Metric)
ASTM    A 467/A 467M-07(2012) : Standard Specification for Machine and Coil Chain
ASTM    C 467-97(2008) : Standard Classification of  Mullite Refractories
ASTM    B 467-14 : Standard Specification for Welded Copper-Nickel Pipe
ASTM    F 467-13E1 : Standard Specification for Nonferrous Nuts for General Use
ASTM    E 467-08e1 : Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM    E 468-11 : Standard Practice for  Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
ASTM    B 468-10 : Standard Specification for Welded UNS N08020 Alloy Tubes
ASTM    F 468-12 : Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM    F 468M-06(2012) : Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
ASTM    C 469/C 469M-14 : Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
ASTM    A 469/A 469M-07(2012) : Standard Specification for  Vacuum-Treated Steel Forgings for Generator Rotors
ASTM    B 470-02(2012) : Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment
ASTM    C 470/C 470M-09 : Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
ASTM    D 470-13 : Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM    A 470/A 470M-05(2010) : Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
ASTM    F 470-89(2009) : Standard Practice for Caking Temperature of Dry Electrostatic Toner
ASTM    D 471-12A : Standard Test Method for Rubber Property – Effect of Liquids
ASTM    A 471/A 471M-09 : Standard Specification for  Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
ASTM    E 471-96(2011) : Standard Test Method for  Obtaining Char Density Profile of Ablative Materials by Machining and Weighing