LIST OF ASTM STANDARDS 701 TO 800

ASTM    G 205-10 : Standard Guide for Determining Corrosivity of Crude Oils
ASTM    F 205-94(2010)e1 : Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM    G 206-11 : Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM    C 206-03(2009) : Standard Specification for Finishing Hydrated Lime
ASTM    B 206/B 206M-12 : Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire
ASTM    G 207-11 : Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
ASTM    C 207-06(2011) : Standard Specification for Hydrated Lime for Masonry Purposes
ASTM    E 207-08 : Standard Test Method for  Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM    E 208-06(2012) : Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
ASTM    B 208-14 : Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
ASTM    G 208-12 : Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM    C 208-12 : Standard Specification for Cellulosic Fiber Insulating Board
ASTM    D 209-81(2012) : Standard Specification for Lampblack Pigment
ASTM    C 209-07ae1 : Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM    B 209M-10 : Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
ASTM    E 209-00(2010) : Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM    A 209/A 209M-03(2012) : Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
ASTM    B 209-10 : Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM    G 209-13 : Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
ASTM    G 210-13 : Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM    A 210/A 210M-02(2012) : Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ASTM    B 210M-12 : Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)
ASTM    B 210-12 : Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM    C 210-95(2007)e1 : Standard Test Method for Reheat Change of Insulating Firebrick
ASTM    E 210-63(2010) : Standard Specification for Microscope Objective Thread
ASTM    D 210-05(2011) : Standard Specification for Bone Black Pigment
ASTM    E 211-82(2010) : Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
ASTM    B 211-12e1 : Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
ASTM    B 211M-12e1 : Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
ASTM    D 211-67(2012) : Standard Specification for Chrome Yellow and Chrome Orange Pigments
ASTM    C 212-14 : Standard Specification for Structural Clay Facing Tile
ASTM    B 212-13 : Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM    E 213-14 : Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
ASTM    A 213/A 213M-14 : Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM    B 213-13 : Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM    A 214/A 214M-96(2012) : Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM    B 214-07(2011) : Standard Test Method for Sieve Analysis of  Metal Powders
ASTM    B 215-10 : Standard Practices for Sampling Metal Powders
ASTM    C 215-08 : Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
ASTM    E 215-11 : Standard Practice for  Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube
ASTM    C 216-14 : Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
ASTM    B 216-10 : Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
ASTM    A 216/A 216M-14 : Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
ASTM    A 217/A 217M-14 : Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
ASTM    C 217/C 217M-09 : Standard Test Method for Weather Resistance of Slate
ASTM    D 217-10 : Standard Test Methods for Cone Penetration of Lubricating Grease
ASTM    F 218-13 : Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM    C 219-13A : Standard Terminology Relating to Hydraulic Cement
ASTM    F 219-96(2013) : Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps
ASTM    E 220-13 : Standard Test Method for Calibration of Thermocouples By Comparison Techniques
ASTM    A 220/A 220M-99(2014) : Standard Specification for Pearlitic Malleable Iron
ASTM    C 220-91(2009) : Standard Specification for Flat Asbestos-Cement Sheets
ASTM    B 221M-13 : Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
ASTM    F 221-98(2009) : Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom
ASTM    B 221-13 : Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM    C 221-98(2008) : Standard Specification for Corrugated Asbestos-Cement Sheets
ASTM    C 222-97(2008) : Standard Specification for Asbestos-Cement Roofing Shingles
ASTM    E 222-10 : Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
ASTM    B 223-08(2013) : Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
ASTM    C 223-98(2008) : Standard Specification for Asbestos-Cement Siding
ASTM    E 223-08 : Standard Test Methods for Analysis of Sulfuric Acid
ASTM    B 224-14 : Standard Classification of Coppers
ASTM    C 224-78(2009) : Standard Practice for Sampling Glass Containers
ASTM    E 224-08 : Standard Test Methods for  Analysis of Hydrochloric Acid
ASTM    C 225-85(2009) : Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM    A 225/A 225M-12 : Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
ASTM    C 226-12 : Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
ASTM    B 226-11 : Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM    D 226/D 226M-09 : Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
ASTM    D 227/D 227M-03(2011)e1 : Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
ASTM    A 227/A 227M-06(2011) : Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
ASTM    B 227-10 : Standard Specification for Hard-Drawn Copper-Clad Steel Wire
ASTM    C 227-10 : Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
ASTM    A 228/A 228M-14 : Standard Specification for Steel Wire, Music Spring Quality
ASTM    E 228-11 : Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM    D 228/D 228M-09(2014) : Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
ASTM    B 228-11a : Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM    A 229/A 229M-12 : Standard Specification for  Steel Wire, Quenched and Tempered for Mechanical Springs
ASTM    B 229-12 : Standard Specification for  Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
ASTM    D 229-13 : Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
ASTM    B 230/B 230M-07(2012) : Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes
ASTM    C 230/C 230M-13 : Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
ASTM    A 230/A 230M-05(2011)e1 : Standard Specification for  Steel Wire, Oil-Tempered Carbon Valve Spring Quality
ASTM    E 230/E 230M-12 : Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
ASTM    A 231/A 231M-10 : Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
ASTM    B 231/B 231M-12 : Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM    C 231/C 231M-14 : Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM    B 232/B 232M-11 : Standard Specification for  Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
ASTM    C 232/C 232M-14 : Standard Test Method for Bleeding of Concrete
ASTM    A 232/A 232M-05(2011)e1 : Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM    C 233/C 233M-11 : Standard Test Method for  Air-Entraining Admixtures for Concrete
ASTM    D 233-13 : Standard Test Methods of Sampling and Testing Turpentine
ASTM    B 233-97(2012) : Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM    A 234/A 234M-13E1 : Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM    B 234M-10 : Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric] ASTM    B 234-10 : Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
ASTM    D 235-02(2012) : Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
ASTM    E 235/E 235M-12 : Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications
ASTM    E 236-66(2011) : Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
ASTM    B 236M-07 : Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST