List of ASTM Standard 7701 to 7800

ASTM    D 2595-96(2008)E1 : Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
ASTM    E 2595-07(2013) : Standard Guide for Privilege Management Infrastructure
ASTM    D 2596-10E1 : Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
ASTM    E 2597/E 2597M-14 : Standard Practice for Manufacturing Characterization of Digital Detector Arrays
ASTM    D 2597-10 : Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
ASTM    D 2598-12 : Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
ASTM    F 2598-09 : Standard Consumer Safety Specification for Clothing Storage Chests
ASTM    E 2598/E 2598M-13 : Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
ASTM    E 2599-11 : Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM    F 2599-11 : Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
ASTM    F 2600-09(2013) : Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
ASTM    E 2600-10 : Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions
ASTM    E 2601-08 : Standard Practice for Radiological Emergency Response
ASTM    F 2601-13 : Standard Specification for Fire Safety for Candle Accessories
ASTM    F 2602-13 : Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM    E 2602-09 : Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature   Differential Scanning Calorimetry
ASTM    F 2603-06(2012) : Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds
ASTM    D 2603-01(2013) : Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
ASTM    E 2603-08 : Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM    E 2604-09 : Standard Practice for Data Characteristics of Equipment Records
ASTM    F 2605-08e1 : Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
ASTM    E 2605-13 : Standard Practice for Receiving Assets
ASTM    F 2606-08(2014) : Standard Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
ASTM    E 2606-13 : Standard Practice for Receipt Notification as a Result of Tangible Asset Movement
ASTM    E 2607-08(2013) : Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements
ASTM    F 2607-08 : Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM    E 2608-08(2014) : Standard Practice for Equipment Control Matrix (ECM)
ASTM    F 2608-07 : Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
ASTM    E 2609-08 : Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
ASTM    D 2609-02(2008) : Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM    F 2609-11 : Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
ASTM    E 2610-08(2011) : Standard Test Method for Sensory Analysis—Duo-Trio Test
ASTM    F 2611-11 : Standard Guide for Design and Construction of Chain Link Security Fencing
ASTM    E 2611-09 : Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials  Based on the Transfer Matrix Method
ASTM    D 2612-99(2011) : Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
ASTM    F 2612-07 : Standard Practice for Design and Manufacture of Turbine Engines for Unmanned Aircraft System
ASTM    F 2613-13 : Standard Consumer Safety Specification for Children’s Chairs and Stools
ASTM    E 2613-14 : Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults
ASTM    D 2613-01(2012) : Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
ASTM    E 2614-08 : Standard Guide for Evaluation of Cleanroom Disinfectants
ASTM    F 2614-09(2014) : Standard Specification for Condition 3 Bicycle Frames
ASTM    E 2615-08 : Standard Specification for <span class=”italic”>Aphidoletes aphidimyza</span> (Rondani) (<span class=”italic”>Diptera: Cecidomyiidae</span>)
ASTM    E 2616-09 : Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations
ASTM    D 2616-12 : Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
ASTM    F 2617-08e1 : Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM    D 2617-12 : Standard Test Method for  Total Ash in Leather
ASTM    E 2617-10 : Standard Practice for Validation of Empirically Derived Multivariate Calibrations
ASTM    F 2618-09 : Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
ASTM    E 2618-13 : Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
ASTM    E 2619/E 2619M-09e1 : Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
ASTM    D 2619-09 : Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
ASTM    F 2619/F 2619M-13 : Standard Specification for High-Density Polyethylene (PE) Line Pipe
ASTM    E 2620-08 : Standard Classification for Program and Project Estimate Summaries
ASTM    F 2620-13 : Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
ASTM    D 2621-87(2011) : Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM    F 2621-12 : Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure
ASTM    F 2622-08(2013) : Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM    D 2622-10 : Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM    F 2623-08 : Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
ASTM    E 2623-08e1 : Standard Practice for Reporting Thermometer Calibrations
ASTM    E 2624-09 : Standard Practice for Torque Calibration of Testing Machines and Devices
ASTM    F 2624-12 : Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs
ASTM    D 2624-09 : Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM    F 2625-10 : Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM    E 2625-09 : Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
ASTM    D 2625-94(2010) : Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
ASTM    D 2626/D 2626M-04 (Reapproved 2012)e1 : Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
ASTM    F 2626-12 : Standard Terminology for Light Sport Aircraft
ASTM    E 2626-08e1 : Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM    E 2627-13 : Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM    D 2627-08(2012) : Standard Specification for Diacetone Alcohol
ASTM    E 2628-09e1 : Practice for Dosimetry in Radiation Processing
ASTM    D 2628-91(2011) : Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM    E 2629-11 : Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
ASTM    F 2630-07 : Standard Guide for Self-Closing/Self-Latching General-Purpose Gates
ASTM    E 2630-08(2013) : Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
ASTM    E 2631-09 : Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
ASTM    F 2631-07 : Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities
ASTM    D 2632-01(2014) : Standard Test Method for Rubber Property – Resilience by Vertical Rebound
ASTM    F 2632-07(2013)E1 : Standard Practice for Determining the Toner Usage for Color Printer Cartridges
ASTM    E 2632/E 2632M-13E1 : Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials
ASTM    F 2633-13 : Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
ASTM    D 2633-13A : Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
ASTM    E 2634-11 : Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
ASTM    D 2634-07(2013) : Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM    F 2634-10 : Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM    E 2635-14 : Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
ASTM    D 2635-07(2012) : Standard Specification for Methyl Isobutyl Carbinol
ASTM    D 2636-07(2012) : Standard Specification for Hexylene Glycol
ASTM    E 2637-13 : Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E2150
ASTM    D 2638-10 : Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM    E 2638-10 : Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
ASTM    F 2638-12 : Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM    D 2639/D 2639M-13 : Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
ASTM    E 2639-12 : Standard Test Method for Blast Resistance of Trash Receptacles
ASTM    F 2639-07e1 : Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems
ASTM    F 2640-14 : Standard Consumer Safety Specification for Booster Seats
ASTM    E 2640-10 : Standard Guide for Resource Management in Emergency Management and Homeland Security
ASTM    E 2641-09 : Standard Practice for Best Practices for Safe Application of 3D Imaging Technology
ASTM    F 2641-08 : Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes