List of ASTM Standard 9901 to 10000

ASTM    D 4796-10 : Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM    D 4797-12A : Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM    D 4798/D 4798M-11 : Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM    D 4799/D 4799M-08(2013)E1 : Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM    D 4800-94(2011) : Standard Guide for  Classifying and Specifying Adhesives
ASTM    D 4801-08 : Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
ASTM    D 4802-10 : Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM    D 4803-10 : Standard Test Method for Predicting Heat Buildup in PVC Building Products
ASTM    D 4804-09 : Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM    D 4806-14 : Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM    D 4807-05(2010) : Standard Test Method for Sediment in Crude Oil by Membrane Filtration
ASTM    D 4808-01(2012) : Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM    D 4809-13 : Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM    D 4810-06(2011) : Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM    D 4811/D 4811M-06(2013)E1 : Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
ASTM    D 4812-11 : Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
ASTM    D 4814-14a : Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM    D 4815-13 : Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
ASTM    D 4817-88 (Reapproved 2012) : Standard Classification for Rubber Compounding Materials – Stearic Acid
ASTM    D 4818-89(2012) : Standard Classification for Rubber Compounding Materials – Vulcanization Accelerators
ASTM    D 4819-13 : Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM    D 4821-07e1 : Standard Guide for Carbon Black<char: emdash>Validation of Test Method Precision and Bias
ASTM    D 4822-88(2014) : Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
ASTM    D 4823-95(2014) : Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
ASTM    D 4824-13 : Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM    D 4827-03(2009) : Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
ASTM    D 4828-94(2012)e1 : Standard Test Methods for Practical Washability of Organic Coatings
ASTM    D 4829-11 : Standard Test Method for Expansion Index of Soils
ASTM    D 4830/D 4830M-98(2014)E1 : Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
ASTM    D 4831-00(2010) : Standard Test Method for Buckle Tear Strength of Leather
ASTM    D 4832-10 : Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM    D 4833/D 4833M-07(2013)E1 : Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM    D 4834-03(2008) : Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM    D 4835-08(2012) : Standard Specification for Propylene Glycol Monomethyl Ether Acetate
ASTM    D 4836-09 : Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM    D 4837-07(2012) : Standard Specification for Propylene Glycol Monomethyl Ether
ASTM    D 4838-88(2010) : Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
ASTM    D 4839-03(2011) : Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM    D 4840-99(2010) : Standard Guide for Sampling Chain-of-Custody Procedures
ASTM    D 4841-88(2013)E1 : Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM    D 4843-88(2009) : Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM    D 4844-03(2009) : Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
ASTM    D 4845-10E2 : Standard Terminology Relating to Wool
ASTM    D 4846-96(2011) : Standard Test Method for Resistance to Unsnapping of Snap Fasteners
ASTM    D 4847-02(2008) : Standard Performance Specification for Woven Awning and Canopy Fabrics
ASTM    D 4848-98(2012) : Standard Terminology Related to Force, Deformation and Related Properties of Textiles
ASTM    D 4849-13 : Standard Terminology Related to Yarns and Fibers
ASTM    D 4850-13 : Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM    D 4851-07(2011) : Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
ASTM    D 4852-88(2009)e1 : Standard Practice for Evaluation of Attached Upholstery Fabrics
ASTM    D 4856-11 : Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
ASTM    D 4857-12 : Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
ASTM    D 4858-13 : Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
ASTM    D 4859-13 : Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
ASTM    D 4860-13 : Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM    D 4861-11 : Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
ASTM    D 4863-13 : Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
ASTM    D 4864-90(2013) : Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
ASTM    D 4865-09 : Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM    D 4866/D 4866M-88(2011)e1 : Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
ASTM    D 4867/D 4867M-09 : Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
ASTM    D 4868-00(2010) : Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM    D 4869/D 4869M-05(2011)e1 : Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
ASTM    D 4870-09 : Standard Test Method for Determination of Total Sediment in Residual Fuels
ASTM    D 4871-11 : Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
ASTM    D 4872-99(2010) : Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
ASTM    D 4873-02(2009) : Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
ASTM    D 4874-95(2006) : Standard Test Method for Leaching Solid Material in a Column Apparatus
ASTM    D 4875-11 : Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
ASTM    D 4877-10 : Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
ASTM    D 4878-08 : Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM    D 4879-08 : Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
ASTM    D 4880-08 : Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
ASTM    D 4881-05(2012) : Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
ASTM    D 4882-05(2012) : Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM    D 4883-08 : Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM    D 4884/D 4884M-14A : Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
ASTM    D 4885-01(2011) : Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM    D 4886-10 : Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
ASTM    D 4887/D 4887M-11 : Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
ASTM    D 4888-06(2011) : Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
ASTM    D 4889-04(2011) : Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
ASTM    D 4890-13 : Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
ASTM    D 4891-13 : Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
ASTM    D 4892-14 : Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
ASTM    D 4893-94(2009) : Standard Test Method for Determination of Pitch Volatility
ASTM    D 4894-07 (Reapproved 2012) : Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM    D 4895-10 : Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM    D 4896-01(2008)e1 : Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM    D 4897/D 4897M-01(2009) : Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
ASTM    D 4898-90(2010)e1 : Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM    D 4899-99(2009) : Standard Practice for Analysis of Vegetable Tanning Materials-General
ASTM    D 4900-99(2009) : Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
ASTM    D 4901-99(2009) : Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
ASTM    D 4902-99(2009) : Standard Test Method for Evaporation and Drying of Analytical Solutions
ASTM    D 4903-99(2009) : Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
ASTM    D 4904-99(2009) : Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
ASTM    D 4905-99(2009) : Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
ASTM    D 4906-95(2012) : Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM    D 4907-10 : Standard Test Method for Nitrocellulose in Finish on Leather

QUICK QUOTE

Get Your Quote from Our Materials Scientists within 4 Hours

    Full Name *

    Your Email *

    Phone *

    Company

    Testing Needed *

    OR

    EMAIL US

    OR

    CALL US

    INDIA
    Telephone : (0253) 2361782
    Mobile : +91 9552508782
    USA
    Telephone : +1 352 328 1189
    Telephone : +1 770 333 6389

    TESTING SERVICES

    Our Team

    Collaborate with us

    Get A Quote

    Our Services

    SEND US A REQUEST

    Need help or have a question? (0253) 2361782

    SEND US A REQUEST